54
4
Coordination Compounds
Aims
4.1 Introduction
In order to explain the formulae and structures of the complex compounds,
or complexes, formed by transition metal salts with molecular
species such as ammonia, Werner coined the terms primary valence and
secondary valence, as explained in Chapter 1. These concepts remain valid
today except that the term oxidation state has replaced ‘primary valence’
and the term coordination number has replaced ‘secondary valence’.
Werner had recognized that a transition metal salt could form a complex
compound in which the metal ion became bonded to a number
of groups which need not necessarily be the counter anions originally
present in the salt. The orientations in space of these metal-bound
groups would lead to the complex having a particular geometric
Aims
By the end of this chapter you should understand the terms:
• Coordination compound
• Coordination number
• Coordination geometry
• Uni-, bi- and poly-dentate as applied to ligands
• Homo- and hetero-leptic as applied to complexes
and have a knowledge of:
• The structures of the regular coordination polyhedra of coordination
compounds
• The types of isomerism possible in transition element complexes
• Some representative types of ligand which may appear in transition
element complexes
When considering the structures
of coordination compounds it is
worth noting that transition
element complexes are usually
formed from reactions between
their salts and Brønsted bases in
solution. However, the structures
of the compounds formed are
usually determined in the solid
state using samples crystallized
from solution. While it may usually
be assumed that the solid state
structures are similar to the
solution structures, this may not
always be so, and some
complexes may adopt different
structures in solution and the
solid state.
structure. In this chapter the structures of transition element complexes
are examined in more detail and some definitions of key terms are
provided.
4.2 Coordination Compounds
4.2.1 Complexes
One definition of a metal complex or coordination compound is ‘a compound
formed from a Lewis acid and a Brønsted base’, a Lewis acid being
an electron pair acceptor and a Brønsted base a proton acceptor. Thus
the interaction of the Lewis acid metal centre in Ni(ClO4)2 with the
Brønsted base ammonia to form a complex according to equation 4.1
Ni(ClO4)2 + 6NH3 → [Ni(NH3)6](ClO4)2 (4.1)
provides an example of the formation of a coordination compound. In
writing the formulae of metal complexes it is conventional to include the
complete coordination complex within square brackets, an example being
provided by [Co(NH3)5Cl]Cl2, in which the coordination complex is
[Co(NH3)5Cl]2+ with two chloride counterions. The Brønsted bases
attached to the metal ion in such compounds are called ligands. These
may be simple ions such as Cl–, small molecules such as H2O or NH3,
larger molecules such as H2NCH2CH2NH2 or N(CH2CH2NH2)3, or even
macromolecules, such as proteins.
The coordination number (CN) of a metal ion in a complex can be
defined as the number of ligand donor atoms to which the metal is directly
bonded. In the case of [Co(NH3)5Cl]2+ this will be 6, the sum of one
chloride and five ammonia ligands each donating an electron pair.
Although this definition usually works well for coordination compounds,
it is not always appropriate for organometallic compounds. An alternative
definition of CN would be the number of electron pairs arising from
the ligand donor atoms to which the metal is directly bonded. To apply
this definition, it is necessary to assume an ionic formulation and a
particular oxidation state for the metal ion, so that charges can be
assigned to the ligands as appropriate and the number of electron pairs
determined.
4.2.2 Types of Ligand
Where a ligand is bound to a metal ion through a single donor atom, as
with Cl–, H2O or NH3, the ligand is said to be unidentate (the ligand
binds to the metal through a single point of attachment as if it had one
Coordination Compounds 55
Strictly speaking, the term ‘ligand’
only applies to groups attached
to a metal ion. The term
proligand may be used to refer
to a species which may become
a ligand through being bound to
a metal ion but is not presently in
a complex. In this text the
symbols X, Y, Z will be used to
represent ligands such as F, Cl,
NH3 or H2O in which one donor
atom is bound to the metal ion.
The symbol L–L will be used to
denote a ligand such as
H2NCH2CH2NH2 which is bound
to a metal ion through two donor
atoms. The general symbol L will
be used to represent a ligand of
any type.
tooth). Where two donor atoms can be used to bind to a metal ion, as
with H2NCH2CH2NH2, the ligand is said to be bidentate, and where several
donor atoms are present in a single ligand as with N(CH2CH2NH2)3,
the ligand is said to be polydentate. When a bi- or polydentate ligand
uses two or more donor atoms to bind to a single metal ion, it is said
to form a chelate complex (from the Greek for claw). Such complexes
tend to be more stable than similar complexes containing unidentate ligands
for reasons which will be explored in Chapter 5. A huge variety of
ligands appear in coordination complexes and, to illustrate this point,
some examples of common types of ligand are shown in Figures 4.1–4.4.
Any of a variety of elements may function as donor atoms towards metal
ions, but the most commonly encountered are probably nitrogen, phosphorus,
oxygen, sulfur and the halides. In addition, a large number of
compounds are known which contain carbon donor atoms; these are
known as organometallic compounds (see page 11). Bidentate ligands
may be classified according to the number of atoms in the ligand which
separate the donor atoms (Figure 4.1) and hence the size of the chelate
ring formed with the metal ion. Thus 1,1-ligands form a four-membered
chelate ring when bound to a metal ion, 1,2-ligands a five membered
ring, and so on. Cyclic compounds which contain donor atoms oriented
so that they can bind to a metal ion and which are large enough to
encircle it are known as macrocyclic proligands and some examples are
shown in Figure 4.4. Bicyclic proligands are also known which can completely
encapsulate a metal ion. Some of these systems have given the
names cryptand or sepulchrate, which reflect their ability to wrap up and
entomb the metal ion (Figure 4.4).
Sometimes ligands can bind to more than one metal ion in a bridging
arrangement, for example in [W2Cl9]3– illustrated in Figure 4.5.
Certain polydentate ligands are particularly good at linking together several
metal ions and are refered to as polynucleating ligands.
4.2.3 Structure and Isomerism
In coordination compounds, or complexes, the transition elements may
show CNs ranging from 1 up to 12 or more for some f-block elements.
As there are more ways than one of arranging two, or more, ligand donor
atoms about a central metal ion, structural isomers are possible.
However, in practice, certain structural arrangements are more
favourable energetically than others, limiting the range of commonly
found structural types. The idealized regular coordination geometries of
complexes with CNs from 1 to 6 are summarized in Figure 4.6, CNs 7
and 8 in Figure 4.7 and the higher CNs 9–12 in Figure 4.8. Transition
metal complexes usually conform to idealized geometries in an approximate
sense, although some distortions from ideality are often present.
56 d- and f- Block Chemistry
A macrocyclic ligand may be
defined as a cyclic compound
comprising a ring of at least nine
atoms including at least three
donor atoms oriented so as to
bind to a metal ion. In this
minimum form a macrocyclic
ligand would occupy three
adjacent coordination sites on
one side of a metal ion. However,
larger rings such as cyclam or
porphine derivatives (Figure 4.4)
may have a central cavity large
enough for the metal ion to fit
into the plane of the macrocycle.
The term coordination
geometry refers to the structural
arrangement of ligand donor
atoms around a metal atom in a
complex. Thus, in a fourcoordinate
metal complex the
donor atoms could be arranged
at the vertices of a tetrahedron
giving a tetrahedral coordination
geometry, or they could lie in the
same plane to give a square
planar coordination geometry (see
margin note on isomers, page
10).
However, the structures of the lanthanide ions tend to be less regular,
particularly when more than one type of ligand is present in a heteroleptic
complex.
The lower CNs are rare among the transition elements. A CN of 1 is
very unusual, although not unknown. Its formation depends upon the
presence of a very bulky ligand which prevents the binding of additional
ligands. A CN of 2 is found in some complexes of d10 ions such as
Ag+ or Au+, and the geometries of these complexes are normally linear,
not bent. A CN of 3 can arise in complexes with sterically demanding
ligands such as the bulky amide ligand N(SiMe3)2
–. The d-block metal
complexes [M{N(SiMe3)2}3] (M = Fe, Cr) have a trigonal planar coordination
geometry rather than the T-shaped or pyramidal structures
encountered with p-block elements. The f-block metal complex
[La{N(SiMe3)2}3] is also thought to have a planar stucture in solution
Coordination Compounds 57
Complexes in which a metal is
bound to only one kind of donor
group, e.g. [Co(NH3)6]3+, are
known as homoleptic.
Complexes in which a metal is
bound to more than one kind of
donor group, e.g. [Co(NH3)4Cl2]+,
are known as heteroleptic.
R
O–
O
RO
S–
S
R2N
S–
S
H2C
PPh2
PPh2
H2N NH2
OH
O
R
R S–
S–
N N
R R
R′N NR′
O
R
O–
R
OH
NR
NH2 NH2
Ligand type
Bidentate
1,1
Bidentate
1,2
Bidentate
1,3
Carboxylate Dithiocarbamate
Bis(diphenylphosphino)
methane
(dppm)
Ethane-1,2-diamine
(en)
Xanthate
α-Di-imine
(R′ = hydrocarbyl, OH)
1,2-Dithiolate
(R = hydrocarbyl, CN, CF3)
2-Hydroxycyclohepta-2,4,6-trienone
(tropolone)
2,2′-Bipyridyl
(bpy or bipy)
Propane-1,3-diamine
(tn)
β-Diketonate
(acac– if R = Me)
2-Hydroxybenzaldimine
(salicylaldimine)
(R = hydrocarbyl)
Figure 4.1 Some examples of
bidentate ligands
58 d- and f- Block Chemistry
NH2
NH2 NH2
R R′
R R′
R
N
–HB
N
N N
N N
R′ Tripodal
Ligand type
1,3,5-Triaminocyclohexane
fac coordination only*
Tris(pyrazol-1-yl)borates
fac coordination only*
R, R′ = H, hydrocarbyl
(tp–: R, R′ = H; tpMe2–: R, R′ = Me)
H2N N
H
NH2
O– N
–S
R R
Imino derivatives
mer coordination
only*
Linear
1,4,7-Triazaheptane
(diethylenetriamine or trien)
fac or mer coordination
possible*
* The terms fac and mer are defined in Section 4.2.2
on Geometric Isomerism
N
NH2
NH2 H2N
NH HN
NH2 H2N
N
OH HO
N N N
N
NH HN
N
Linear saturated
1,4,8,11-Tetra-azaundecane
(2,3,2-tetramine or 2,3,2-tet)
Branched saturated
Tris(2-aminoethyl)amine
(triethylenetetramine or tren)
Ligand type
Saturated
Unsaturated
(acac)2enH2
A Schiff's base formed
from from 2acacH + en
A Schiff's base formed from
2-pyridylhydrazine and
butane-2,3-dione
Figure 4.2 Some examples of
tridentate ligands
Figure 4.3 Some examples of
quadridentate ligands
but is pyramidal in the solid state, and provides an extremely rare example
of an f-block element with a very low CN. Complexes with CN of 4
are fairly common for certain d-block metals. These complexes may be
square planar or tetrahedral in geometry and, for reasons which will be
explained in Chapter 6, metal ions with d8 electron configurations tend
Coordination Compounds 59
Figure 4.4 Some examples of
macrocyclic ligands
Figure 4.5 Examples of a
bridging ligand and a polynucleating
ligand
N
H H
H
N N
S
S S
NH
N
NH
NH
N
NH
NH
NH
NH NH
NH NH
NH N
N NH
N
O
F
B
O
N
N
O
B
O
N
O
N
O
N
F
1,4,8,11-Tetra-azacyclotetradecane
(cyclam)
Porphine
Macrocyclic
cryptand
Macrocyclic
tetradentate
Ligand type
Macrocyclic
tridentate
1,4,7-Triazaocyclononane
fac coordination only*
1,4,7-Trithiacyclononane
fac coordination only*
Cryptand Sepulchrate
–
* The terms fac and mer are defined in Section 4.2.2
on Geometric Isomerism
–
Cl
W
Cl
W
Cl
Cl
Cl
Cl
Cl Cl
Cl
O O O
O O O
Ni Ni
3–
[W2Cl9]3–
A complex containing
three bridging
chloride ligands
A complex containing
binucleating ligands
to be square planar and those with d5 or d10 configurations tetrahedral.
A CN of 5 is unusual among transition element complexes and, in a complex
which is purely ionically bonded, would be unstable with respect to
disproportionation into CN 4 and 6 species. However, covalent contributions
to bonding can stabilize CN 5. In the absence of structural
demands imposed by the ligands, the two regular structures, trigonal
bipyramidal and square pyramidal, are easily interconverted and similar
in energy. In the solid state, both structures can be found in slightly distorted
form in the salt [Ni(CN)5]3–.
60 d- and f- Block Chemistry
M
M
M
M
M
M
M
M
M
M
Linear
2
1
Comments
3
4
5
6
Unimportant
4
5
6
Trigonal
plane
Square
plane
Tetrahedron
Trigonal
bipyramid
Square
pyramid
Trigonal
prismatic
Octahedron
(Octahedron
= trigonal
antiprism)
Uncommon: found mainly
with d10 metal ions
Rare; can be induced by use of
sterically bulky ligands
Common for d8 metal ions
otherwise unusual;
Rare
Rare
Rare, and requires some
extra steric or electronic
benefit to be favoured over
octahedral
Very common; usually the
most favoured energeticaly
and gives the lowest
ligand–ligand repulsions
Fairly common, especially
for d10 and some d5 ions
Examples are
often similar in
structure and
energy so may
easily
interconvert
An alternative view of an
octahedron down a three-fold
rotation axis
Coordination
Number Geometry Polyhedron
—
—
Figure 4.6 Idealized structures
for coordination numbers 1–6
The most common CN for d-block transition metal ions is 6, usually
with an octahedral geometry. Ligand–ligand interactions make trigonal
prismatic structures less energetically favourable so that this geometry is
rare, although some examples are known, e.g. [WMe6] and [Re(S2C2Ph2)].
Coordination Compounds 61
Monocapped
octahedron
Pentagonal
bipyramid
M
M
7
7
M
M
M
M
Comments
Uncommon
Uncommon
Coordination
Number Geometry Polyhedron
8
Dodecahedron
8
8
8
Square
antiprism
Cube
Hexagonal
bipyramid
Most sterically
efficient geometric
arrangement for eight
equivalent ligands
Uncommon
Rare; found only
with the largest
metal ions
Quite common for
eight-coordinate
complexes of metals
with trans-dioxo
ligands
9
Tricapped
trigonal prism
Bicapped square
antiprism
Most regular coordination polyhedra
10
Octadecahedron
11 12
Icosahedron
C.N.
i 8
M M M M
Figure 4.7 Idealized structures
for coordination numbers 7 and 8
Figure 4.8 Idealized structures
for coordination numbers larger
than 8
An important distortion of the octahedral structure, found in certain
complexes, results from stretching or compressing the octahedron along
a fourfold rotation symmetry axis, producing a tetragonal distortion
(Figure 4.9a). This type of distortion is commonly found among complexes
of the d9 Cu2+ ion for reasons which will be explored in Chapter
6. Another, less important, type of distortion results from stretching or
compressing the octahedron along a threefold rotation symmetry axis,
producing a trigonal distortion (Figure 4.9b).
The higher CNs of 7, 8 and 9 are unusual for d-block metals, although
some examples can be found among the complexes of the early secondand
third-row metals. The cyano complexes of molybdenum,
[Mo(CN)8]z– (z = 3, 4), provide well-known examples and, in the solid
state, can be found with a dodecahedral or a square antiprismatic structure,
depending on the counterion present. In contrast, CNs of 8 or 9
are quite typical among the complexes formed by the f-block elements
and CNs up to 14 are known. Although regular geometries can be
assigned to these higher CNs, the energy differences between the different
structures are often small. Since the core-like nature of the f orbitals
gives little directional preference in the bonding, the structures of lanthanide
complexes tend to be determined by ligand–ligand interactions
and distortions from ideal geometries are common. The highest CNs are
found with the larger metal ions and the sterically most compact ligands
such as NO2
– or H2O. An example of 12 coordination is provided by
[Ce(NO3)6]3–, in which six octahedrally disposed nitrate groups each bind
through two oxygens to the Ce3+ ion to give a distorted icosahedral structure.
A rare example of a CN of 14 is found in the solid-state structure
of [U(BH4)4] in which the U4+ ion is bonded to 14 hydrogen atoms.
In addition to the structural isomerism possible for each CN, several
62 d- and f- Block Chemistry
Figure 4.9 Distortions of the
octahedral coordination geometry
M
M
M
M
Elongate or compress along a fourfold rotation (C4) axis
(a) Tetragonal
(b) Trigonal
Elongate or compress along a threefold rotation (C3 ) axis
other types of isomerism (geometric, optical, linkage, coordination, ligand,
ionization, solvate) are possible in transition element complexes.
Geometric Isomerism
In heteroleptic complexes the different possible geometric arrangements
of the ligands can lead to isomerism, and important examples of this
behaviour are found with CNs 4 and 6. In a square planar complex of
formula [MX2L2] (X and L are unidentate) the two ligands X may be
arranged adjacent to each other, in a cis isomer, or opposite each other,
in a trans isomer. Such isomerism is not possible for a tetrahedral geometry
but similar behaviour is possible in CN 6 octahedral complexes of
formula [MX2L4] in which the two ligands X may be oriented cis or trans
to each other (Figure 4.10a). This type of isomerism also arises when ligands
L–L (e.g. L–L = NH2CH2CH2NH2) with two donor atoms are present
in complexes of formula [MX2(L–L)2]. A further example of
geometric isomerism can occur in octahedral complexes of formula
[MX3L3], depending on whether the three ligands X, or L, all lie in the
same plane giving a meridional, or mer, isomer, or whether they are adjacent
forming a triangular face of the octahedron in a facial, or fac, isomer
(Figure 4.10b).
Coordination Compounds 63
Figure 4.10 Isomers of octahedral
complexes
L
M
L
L
L
L
L
Δ
N
H H
H
N N
M
Y
X
Z
L
M
L
L
L L
L
L
M
X
L
X
L
L
L
M
X
X
L
L
L
Δ
X
M
X
L
L L
L
L
M
L
L
X L
X
L
M
X
L
X
L
X
X
M
X
L
L X
L
chelating
ligand L–L [M(L–L)2X2]
enantiomers
[ML4X2]
cis trans
[ML3X3]
[M(L–L)3]
mer
Λ
fac
Isomers
Λ enantiomers
Isomers
Isomers Isomers
Chiral complexes
(a) (b)
(c)
(d) (e)
Optical Isomerism
In the octahedral complexes cis-[MX2(L–L)2] and [M(L–L)3] the presence
of the ligands L–L leads to a further isomeric possibility since the metal
centre is chiral (Figure 4.10c). The presence of the L–L ligands gives rise
to a propeller shape. When rotated clockwise the Δ isomer appears to
screw into the plane while the Λ isomer appears to screw out of the plane
(Figure 4.10d). Thus [Co(en)3]3+ is chiral, and can be resolved into its Δ
and Λ isomers through fractional crystallization with a chiral counter
ion such as tartarate. A tetrahedral complex with four different unidentate
ligands will also be chiral, just like a carbon atom in a chiral organic
molecule. In practice, examples of this type are rare, but an important
example of similar structural type arises with heteroleptic CN 6 complexes
containing one fac-tridentate ligand and three different unidentate
ligands (Figure 4.10e). Some compounds of this type have been
found to be effective reagents in the asymmetric synthesis of chiral organic
molecules and are of importance in the synthesis of certain fine chemicals
and pharmaceuticals.
Linkage Isomerism
Linkage isomerism arises when a ligand may bind to a metal ion through
either of two or more different donor atoms. A simple example is provided
by complexes containing the thiocyanate ligand, NCS–, which may
bind through the nitrogen to give M–NCS or the sulfur to give M–SCN.
The former may be associated with the valence tautomer –N=C=S and
the latter with N≡C–S–. Jørgensen1 discovered the first example of such
behaviour in the complex [Co(NH3)(NO2)]Cl2, which can be obtained as
a red form, in which the nitrite ligand is bound through oxygen, and as
a yellow form, in which the nitrite ligand is bound through nitrogen.
Coordination Isomerism
This form of isomerism arises from the interchange of ligands between
cationic and anionic complexes of different metal ions present in a salt.
An example is provided by [Co(NH3)6][Cr(CN)6], in which the NH3 ligands
are bound to Co3+ and the CN– ligands to Cr3+, and its coordination
isomer [Cr(NH3)6][Co(CN)6] in which the NH3 ligands are bound to
Cr3+ and the CN– ligands to Co3+. A special case of coordination isomerism
can arise in which a series of compounds have the same empirical
formula but different molecular masses for the salt. This is sometimes
referred to as ‘polymerization isomerism’, although it does not involve
polymerization according to a conventional definition involving the linking
together of a single repeating unit. An example of polymerization
64 d- and f- Block Chemistry
isomerism is provided by the series of salts in which both the cation and
the anion contain Co3+ and which have the empirical formula
{Co(NH3)3(NO2)3}x, e.g.
[Co(NH3)6][Co(NO2)6] (x = 2)
[Co(NH3)4(NO2)2][Co(NH3)2(NO2)4] (x = 2)
[Co(NH3)5(NO2)][Co(NH3)2(NO2)4]2 (x = 3)
[Co(NH3)6][Co(NH3)2(NO2)4]3 (x = 4)
Ligand Isomerism
As the name implies, ligand isomerism arises from the presence of ligands
which can adopt different isomeric forms. An example is provided
by diaminopropane, which may have the amine groups in the terminal
1,3-positions (H2NCH2CH2CH2NH2) or in the 1,2-positions {H2NCH2-
CH(Me)NH2}.
Ionization Isomerism
This arises when the counterion in a complex salt is a proligand and can,
in principle, displace a ligand which can then become the counterion. An
example is provided by the ionization isomers [Co(NH3)5SO4]Br and
[Co(NH3)5Br](SO4).
Solvate Isomerism
This form of isomerism, sometimes known as ‘hydrate isomerism’ in the
special case where water is involved, is similar in some ways to ionization
isomerism. Solvate isomers differ by whether or not a solvent
molecule is directly bonded to the metal ion or merely present as free
solvent in the crystal lattice or solution. An example is provided by the
aqua complex [Cr(H2O)6]Cl3 and its solvate isomer [Cr(H2O)5Cl]Cl2.H2O.
Coordination Compounds 65
Worked Problem 4.1
Q Draw all the possible isomers of a five-coordinate complex of
formula [M(L–L)X2A]. In each case, identify the situations in which
optical isomers are possible (A and X represent different unidentate
ligands; L–L represents a bidentate ligand).
4.3 Nomenclature
The systematic naming, or nomenclature, of coordination compounds
can be complicated to apply, but it is essential to have some familiarity
with the basic rules of nomenclature and to be able to work out the structure
of a compound from its systematic name. Only a very brief summary
of the rules for naming of coordination compounds can be given
here, but more detailed accounts are available elsewhere.2,3
4.3.1 Formulae
The formula of a complete coordination entity (e.g. [Co(NH3)6]3+) is written
in square brackets. The absence of [—] implies that not all of the ligands
in the coordination sphere, typically water or solvent, are given in
the formula. As an example, CoCl2 could refer to anhydrous CoCl2,
[CoCl2(H2O)4] or [Co(H2O)6]Cl2, although the latter might be written as
CoCl2.4H2O and CoCl2.6H2O, respectively. The symbol of the central
atom is given first followed by the anionic then the neutral ligands, each
set in alphabetical order. Where possible the donor atom is written first,
66 d- and f- Block Chemistry
A In five-coordinate complexes the basic regular geometries to consider
are square pyramidal and trigonal bipyramidal. The ligands
X and A may occupy apical or basal sites in the former and axial
or equatorial sites in the latter. Similarly, L–L may span similar
locations or different locations in either geometry. The possibilities
which arise are shown in Figure 4.11.
L
M
L X
A X
L
M
X L
X A
X
M
L X
L A
A
M
L
X
X
L
X
M
X L
A L
L
M
L X
X A
A
M
L
X
X
L
X
M
L
A
X
L
A
M
X L
X L
X
M
L
A
X
L
X
M
X
A
L
L
A
M
X
X
L
L
Enantiomers Enantiomers
Enantiomers
Square pyramidal Trigonal bipyramidal
Enantiomers
Figure 4.11
one exception being water which is conventionally written H2O rather
than OH2. Within the formula, brackets should be ‘nested’ as [{( )}] or
[{[( )]}]. Where the formulae of salts are given, cations come before
anions, e.g. [Co(H2O)6](NO3)2 and K3[Fe(CN)6]. The oxidation states of
the metal ions may be given as superscript Roman numerals following
the ion to which they refer, e.g. [CrIIICl6]3–. Abbreviations may be used
in formulae. These include standard abbreviations for functional groups,
such as Me, Et and Ph respectively for methyl, ethyl or phenyl groups,
and specific abbreviations for ligands, e.g. py for pyridine and en for
ethane-1,2-diamine. Where protic acid ligands are present it is important
to remember that the abbreviation for the neutral ligand must include
the proton(s), so that ox2– may represent ethanedioate (oxalate) and H2ox
represents ethanedioic acid (oxalic acid).
4.3.2 Names
The names of coordination compounds are constructed by listing the
ligands in alphabetical order, regardless of charge, before the name of
the central atom. Numerical prefixes are used to indicate the numbers of
each ligand present, and the oxidation state is given as Roman numerals
in parentheses at the end, e.g. dichlorobis(trimethylamine)-
platinum(II) for [PtCl2(NMe3)2]. Di, tri, etc., are normally used but with
more complicated ligand names the prefixes bis, tris, tetrakis, etc., are
used to avoid confusion, e.g. trichlorotris(trimethylphosphine)rhodium(
III) for [RhCl3(PMe3)3]. In the names of salts, cations come before
anions, as with formulae. Anionic coordination compounds are given the
suffix -ate. Either the oxidation state of the central atom {Stock system;
e.g. hexamminecobalt(III) trichloride for [Co(NH3)6]Cl3}4 or the charge
on the complex (Ewens–Bassett system)5 may be given, e.g. tripotassium
hexacyanoferrate(3–) for K3[Fe(CN)6]; in the Stock system this is
tripotassium hexacyanoferrate(III). Note that ammine in this context
refers to NH3 as a ligand, the term -amine being used for a derivative
such as dimethylamine, NHMe2. Stereochemical descriptors may precede
names or formulae to indicate which isomeric form is present, e.g. cisdiamminedichloroplatinum(
II) for cis-[PtCl2(NH3)2].
4.3.3 Special Symbols
Greek letters are used as special symbols to signify particular structural
features in a compound. The character μ is used to denote an atom or
group which bridges between two or more metal centres. A subscript
denotes the number of atoms bridged as shown in 4.1 and 4.2. The symbol
η is used to denote connected atoms in a ligand which bind to the
metal atom and a superscript identifies the number involved, as shown
Coordination Compounds 67
for 4.3 and 4.4. Finally, the symbol κ is used to denote unconnected
atoms in a polydentate ligand which bind to the metal centre and again
a superscript denotes the number of donor atoms involved and may be
followed by the appropriate donor atom symbol italicized, as in 4.5.
68 d- and f- Block Chemistry
Cl
Cl
Pd
CH2
CH2
L2M
O
ML2
ML2
Cl Cl
M Cl
Cl
Cl
M
L L
L L
[(ML2)(μ2-Cl)2] [(ML2)(μ2-Cl)3(μ3-O)] [PdCl2(η2-C2H4)]
4.1 4.2 4.3
HN
Co
Cl
Cl Cl
H2N NH2
I
Fe
CO
CO
[Fe(η5-C5H5)I(CO)2] [CoCl3{(NH2CH2CH2)2NH-κ3-N,N,N}]
4.4 4.5
Worked Problem 4.2
Q Devise systematic names for the compounds shown in 4.6 and
4.7:
A Placing the ligand names in alphabetical order before the metal
ion name gives:
4.6: dipotassium pentachloronitridoosmate(VI) (Stock system)
{or dipotassium pentachloronitridoosmate(2–) (Ewens–Bassett
system)};
3Cl–
H2N
H2
HN N
NH
2
NH
NH2
Co
N
Os
Cl
Cl Cl
Cl Cl
2K+
4.6 4.7
2–
3+
Coordination Compounds 69
4.7: bis(1,4,7-triazaheptane-κ3-N,N′,N″)cobalt(III) trichloride.
Summary of Key Points
1. The environment of a metal ion in a coordination compound is
defined by its coordination number and coordination geometry.
2. Any of a wide variety of ligands may be involved in forming
coordination compounds with metals.
3. Different isomeric structures are possible for many complexes
and seven different types of isomerism may be identified.
4. A systematic system of nomenclature exists for coordination
compounds of metal ions.
Problems
4.1. Consult text books from the Further Reading section and, for
each of the coordination geometries for coordination numbers from
2 to 8, identify at least one known compound which exemplifies
that coordination geometry. Draw the structure of each using a
notation which reveals the three-dimensional arrangement of the
groups.
4.2. List the seven types of isomerism possible for coordination
compounds, giving an example of each.
4.3. Draw all the possible isomers of:
(i) a four-coordinate complex [ML2XY]
(ii) an octahedral complex [MA2LXYZ]
In each case, identify the situations in which optical isomers are
possible (A, L, X, Y, Z represent different unidentate ligands)
4.4. Draw the possible isomers of the complex [Ru{S2C2-
(CF3)2}(CO)(PPh3)2], in which S2C2(CF3)2 is a bidentate dithiolate
ligand (Figure 4.1).
70 d- and f- Block Chemistry
4.5. Devise systematic names for the compounds shown in
Formulae 4.8–4.11:
NMe2
Co
NMe2
H3N NH3
H3N NH3
Cl
Cl PEt3
PEt3
Pt
4.8 4.9
+
OEt–
PhS
Cl
Pd
Br
Br
Me
S
Pt
Me
S Br
Br
Pt
Me
Me
4.10 4.11
References
1. S. M. Jørgensen, Z. Anorg. Chem., 1893, 5, 147; 1899, 19, 109.
2. J. E. Huheey, E. A. Keiter and R. L. Keiter, Inorganic Chemistry,
4th edn., HarperCollins, New York, 1993, appendix A3.
3. A comprehensive account may be found in the chapter by T. E.
Sloane in Comprehensive Coordination Chemistry, ed. G. Wilkinson,
R.D. Gillard and J.A. McCleverty, Pergamon Press, Oxford, 1987.
4. A. Stock, Z. Angew. Chem., 1919, 27, 373.
5. R. G. V. Ewens and H. Bassett, Chem. Ind., 1949, 27, 131.

MY PHOTO

                   



54
4
Coordination Compounds
Aims
4.1 Introduction
In order to explain the formulae and structures of the complex compounds,
or complexes, formed by transition metal salts with molecular
species such as ammonia, Werner coined the terms primary valence and
secondary valence, as explained in Chapter 1. These concepts remain valid
today except that the term oxidation state has replaced ‘primary valence’
and the term coordination number has replaced ‘secondary valence’.
Werner had recognized that a transition metal salt could form a complex
compound in which the metal ion became bonded to a number
of groups which need not necessarily be the counter anions originally
present in the salt. The orientations in space of these metal-bound
groups would lead to the complex having a particular geometric
Aims
By the end of this chapter you should understand the terms:
• Coordination compound
• Coordination number
• Coordination geometry
• Uni-, bi- and poly-dentate as applied to ligands
• Homo- and hetero-leptic as applied to complexes
and have a knowledge of:
• The structures of the regular coordination polyhedra of coordination
compounds
• The types of isomerism possible in transition element complexes
• Some representative types of ligand which may appear in transition
element complexes
When considering the structures
of coordination compounds it is
worth noting that transition
element complexes are usually
formed from reactions between
their salts and Brønsted bases in
solution. However, the structures
of the compounds formed are
usually determined in the solid
state using samples crystallized
from solution. While it may usually
be assumed that the solid state
structures are similar to the
solution structures, this may not
always be so, and some
complexes may adopt different
structures in solution and the
solid state.
structure. In this chapter the structures of transition element complexes
are examined in more detail and some definitions of key terms are
provided.
4.2 Coordination Compounds
4.2.1 Complexes
One definition of a metal complex or coordination compound is ‘a compound
formed from a Lewis acid and a Brønsted base’, a Lewis acid being
an electron pair acceptor and a Brønsted base a proton acceptor. Thus
the interaction of the Lewis acid metal centre in Ni(ClO4)2 with the
Brønsted base ammonia to form a complex according to equation 4.1
Ni(ClO4)2 + 6NH3 → [Ni(NH3)6](ClO4)2 (4.1)
provides an example of the formation of a coordination compound. In
writing the formulae of metal complexes it is conventional to include the
complete coordination complex within square brackets, an example being
provided by [Co(NH3)5Cl]Cl2, in which the coordination complex is
[Co(NH3)5Cl]2+ with two chloride counterions. The Brønsted bases
attached to the metal ion in such compounds are called ligands. These
may be simple ions such as Cl–, small molecules such as H2O or NH3,
larger molecules such as H2NCH2CH2NH2 or N(CH2CH2NH2)3, or even
macromolecules, such as proteins.
The coordination number (CN) of a metal ion in a complex can be
defined as the number of ligand donor atoms to which the metal is directly
bonded. In the case of [Co(NH3)5Cl]2+ this will be 6, the sum of one
chloride and five ammonia ligands each donating an electron pair.
Although this definition usually works well for coordination compounds,
it is not always appropriate for organometallic compounds. An alternative
definition of CN would be the number of electron pairs arising from
the ligand donor atoms to which the metal is directly bonded. To apply
this definition, it is necessary to assume an ionic formulation and a
particular oxidation state for the metal ion, so that charges can be
assigned to the ligands as appropriate and the number of electron pairs
determined.
4.2.2 Types of Ligand
Where a ligand is bound to a metal ion through a single donor atom, as
with Cl–, H2O or NH3, the ligand is said to be unidentate (the ligand
binds to the metal through a single point of attachment as if it had one
Coordination Compounds 55
Strictly speaking, the term ‘ligand’
only applies to groups attached
to a metal ion. The term
proligand may be used to refer
to a species which may become
a ligand through being bound to
a metal ion but is not presently in
a complex. In this text the
symbols X, Y, Z will be used to
represent ligands such as F, Cl,
NH3 or H2O in which one donor
atom is bound to the metal ion.
The symbol L–L will be used to
denote a ligand such as
H2NCH2CH2NH2 which is bound
to a metal ion through two donor
atoms. The general symbol L will
be used to represent a ligand of
any type.
tooth). Where two donor atoms can be used to bind to a metal ion, as
with H2NCH2CH2NH2, the ligand is said to be bidentate, and where several
donor atoms are present in a single ligand as with N(CH2CH2NH2)3,
the ligand is said to be polydentate. When a bi- or polydentate ligand
uses two or more donor atoms to bind to a single metal ion, it is said
to form a chelate complex (from the Greek for claw). Such complexes
tend to be more stable than similar complexes containing unidentate ligands
for reasons which will be explored in Chapter 5. A huge variety of
ligands appear in coordination complexes and, to illustrate this point,
some examples of common types of ligand are shown in Figures 4.1–4.4.
Any of a variety of elements may function as donor atoms towards metal
ions, but the most commonly encountered are probably nitrogen, phosphorus,
oxygen, sulfur and the halides. In addition, a large number of
compounds are known which contain carbon donor atoms; these are
known as organometallic compounds (see page 11). Bidentate ligands
may be classified according to the number of atoms in the ligand which
separate the donor atoms (Figure 4.1) and hence the size of the chelate
ring formed with the metal ion. Thus 1,1-ligands form a four-membered
chelate ring when bound to a metal ion, 1,2-ligands a five membered
ring, and so on. Cyclic compounds which contain donor atoms oriented
so that they can bind to a metal ion and which are large enough to
encircle it are known as macrocyclic proligands and some examples are
shown in Figure 4.4. Bicyclic proligands are also known which can completely
encapsulate a metal ion. Some of these systems have given the
names cryptand or sepulchrate, which reflect their ability to wrap up and
entomb the metal ion (Figure 4.4).
Sometimes ligands can bind to more than one metal ion in a bridging
arrangement, for example in [W2Cl9]3– illustrated in Figure 4.5.
Certain polydentate ligands are particularly good at linking together several
metal ions and are refered to as polynucleating ligands.
4.2.3 Structure and Isomerism
In coordination compounds, or complexes, the transition elements may
show CNs ranging from 1 up to 12 or more for some f-block elements.
As there are more ways than one of arranging two, or more, ligand donor
atoms about a central metal ion, structural isomers are possible.
However, in practice, certain structural arrangements are more
favourable energetically than others, limiting the range of commonly
found structural types. The idealized regular coordination geometries of
complexes with CNs from 1 to 6 are summarized in Figure 4.6, CNs 7
and 8 in Figure 4.7 and the higher CNs 9–12 in Figure 4.8. Transition
metal complexes usually conform to idealized geometries in an approximate
sense, although some distortions from ideality are often present.
56 d- and f- Block Chemistry
A macrocyclic ligand may be
defined as a cyclic compound
comprising a ring of at least nine
atoms including at least three
donor atoms oriented so as to
bind to a metal ion. In this
minimum form a macrocyclic
ligand would occupy three
adjacent coordination sites on
one side of a metal ion. However,
larger rings such as cyclam or
porphine derivatives (Figure 4.4)
may have a central cavity large
enough for the metal ion to fit
into the plane of the macrocycle.
The term coordination
geometry refers to the structural
arrangement of ligand donor
atoms around a metal atom in a
complex. Thus, in a fourcoordinate
metal complex the
donor atoms could be arranged
at the vertices of a tetrahedron
giving a tetrahedral coordination
geometry, or they could lie in the
same plane to give a square
planar coordination geometry (see
margin note on isomers, page
10).
However, the structures of the lanthanide ions tend to be less regular,
particularly when more than one type of ligand is present in a heteroleptic
complex.
The lower CNs are rare among the transition elements. A CN of 1 is
very unusual, although not unknown. Its formation depends upon the
presence of a very bulky ligand which prevents the binding of additional
ligands. A CN of 2 is found in some complexes of d10 ions such as
Ag+ or Au+, and the geometries of these complexes are normally linear,
not bent. A CN of 3 can arise in complexes with sterically demanding
ligands such as the bulky amide ligand N(SiMe3)2
–. The d-block metal
complexes [M{N(SiMe3)2}3] (M = Fe, Cr) have a trigonal planar coordination
geometry rather than the T-shaped or pyramidal structures
encountered with p-block elements. The f-block metal complex
[La{N(SiMe3)2}3] is also thought to have a planar stucture in solution
Coordination Compounds 57
Complexes in which a metal is
bound to only one kind of donor
group, e.g. [Co(NH3)6]3+, are
known as homoleptic.
Complexes in which a metal is
bound to more than one kind of
donor group, e.g. [Co(NH3)4Cl2]+,
are known as heteroleptic.
R
O–
O
RO
S–
S
R2N
S–
S
H2C
PPh2
PPh2
H2N NH2
OH
O
R
R S–
S–
N N
R R
R′N NR′
O
R
O–
R
OH
NR
NH2 NH2
Ligand type
Bidentate
1,1
Bidentate
1,2
Bidentate
1,3
Carboxylate Dithiocarbamate
Bis(diphenylphosphino)
methane
(dppm)
Ethane-1,2-diamine
(en)
Xanthate
α-Di-imine
(R′ = hydrocarbyl, OH)
1,2-Dithiolate
(R = hydrocarbyl, CN, CF3)
2-Hydroxycyclohepta-2,4,6-trienone
(tropolone)
2,2′-Bipyridyl
(bpy or bipy)
Propane-1,3-diamine
(tn)
β-Diketonate
(acac– if R = Me)
2-Hydroxybenzaldimine
(salicylaldimine)
(R = hydrocarbyl)
Figure 4.1 Some examples of
bidentate ligands
58 d- and f- Block Chemistry
NH2
NH2 NH2
R R′
R R′
R
N
–HB
N
N N
N N
R′ Tripodal
Ligand type
1,3,5-Triaminocyclohexane
fac coordination only*
Tris(pyrazol-1-yl)borates
fac coordination only*
R, R′ = H, hydrocarbyl
(tp–: R, R′ = H; tpMe2–: R, R′ = Me)
H2N N
H
NH2
O– N
–S
R R
Imino derivatives
mer coordination
only*
Linear
1,4,7-Triazaheptane
(diethylenetriamine or trien)
fac or mer coordination
possible*
* The terms fac and mer are defined in Section 4.2.2
on Geometric Isomerism
N
NH2
NH2 H2N
NH HN
NH2 H2N
N
OH HO
N N N
N
NH HN
N
Linear saturated
1,4,8,11-Tetra-azaundecane
(2,3,2-tetramine or 2,3,2-tet)
Branched saturated
Tris(2-aminoethyl)amine
(triethylenetetramine or tren)
Ligand type
Saturated
Unsaturated
(acac)2enH2
A Schiff's base formed
from from 2acacH + en
A Schiff's base formed from
2-pyridylhydrazine and
butane-2,3-dione
Figure 4.2 Some examples of
tridentate ligands
Figure 4.3 Some examples of
quadridentate ligands
but is pyramidal in the solid state, and provides an extremely rare example
of an f-block element with a very low CN. Complexes with CN of 4
are fairly common for certain d-block metals. These complexes may be
square planar or tetrahedral in geometry and, for reasons which will be
explained in Chapter 6, metal ions with d8 electron configurations tend
Coordination Compounds 59
Figure 4.4 Some examples of
macrocyclic ligands
Figure 4.5 Examples of a
bridging ligand and a polynucleating
ligand
N
H H
H
N N
S
S S
NH
N
NH
NH
N
NH
NH
NH
NH NH
NH NH
NH N
N NH
N
O
F
B
O
N
N
O
B
O
N
O
N
O
N
F
1,4,8,11-Tetra-azacyclotetradecane
(cyclam)
Porphine
Macrocyclic
cryptand
Macrocyclic
tetradentate
Ligand type
Macrocyclic
tridentate
1,4,7-Triazaocyclononane
fac coordination only*
1,4,7-Trithiacyclononane
fac coordination only*
Cryptand Sepulchrate
–
* The terms fac and mer are defined in Section 4.2.2
on Geometric Isomerism
–
Cl
W
Cl
W
Cl
Cl
Cl
Cl
Cl Cl
Cl
O O O
O O O
Ni Ni
3–
[W2Cl9]3–
A complex containing
three bridging
chloride ligands
A complex containing
binucleating ligands
to be square planar and those with d5 or d10 configurations tetrahedral.
A CN of 5 is unusual among transition element complexes and, in a complex
which is purely ionically bonded, would be unstable with respect to
disproportionation into CN 4 and 6 species. However, covalent contributions
to bonding can stabilize CN 5. In the absence of structural
demands imposed by the ligands, the two regular structures, trigonal
bipyramidal and square pyramidal, are easily interconverted and similar
in energy. In the solid state, both structures can be found in slightly distorted
form in the salt [Ni(CN)5]3–.
60 d- and f- Block Chemistry
M
M
M
M
M
M
M
M
M
M
Linear
2
1
Comments
3
4
5
6
Unimportant
4
5
6
Trigonal
plane
Square
plane
Tetrahedron
Trigonal
bipyramid
Square
pyramid
Trigonal
prismatic
Octahedron
(Octahedron
= trigonal
antiprism)
Uncommon: found mainly
with d10 metal ions
Rare; can be induced by use of
sterically bulky ligands
Common for d8 metal ions
otherwise unusual;
Rare
Rare
Rare, and requires some
extra steric or electronic
benefit to be favoured over
octahedral
Very common; usually the
most favoured energeticaly
and gives the lowest
ligand–ligand repulsions
Fairly common, especially
for d10 and some d5 ions
Examples are
often similar in
structure and
energy so may
easily
interconvert
An alternative view of an
octahedron down a three-fold
rotation axis
Coordination
Number Geometry Polyhedron
—
—
Figure 4.6 Idealized structures
for coordination numbers 1–6
The most common CN for d-block transition metal ions is 6, usually
with an octahedral geometry. Ligand–ligand interactions make trigonal
prismatic structures less energetically favourable so that this geometry is
rare, although some examples are known, e.g. [WMe6] and [Re(S2C2Ph2)].
Coordination Compounds 61
Monocapped
octahedron
Pentagonal
bipyramid
M
M
7
7
M
M
M
M
Comments
Uncommon
Uncommon
Coordination
Number Geometry Polyhedron
8
Dodecahedron
8
8
8
Square
antiprism
Cube
Hexagonal
bipyramid
Most sterically
efficient geometric
arrangement for eight
equivalent ligands
Uncommon
Rare; found only
with the largest
metal ions
Quite common for
eight-coordinate
complexes of metals
with trans-dioxo
ligands
9
Tricapped
trigonal prism
Bicapped square
antiprism
Most regular coordination polyhedra
10
Octadecahedron
11 12
Icosahedron
C.N.
i 8
M M M M
Figure 4.7 Idealized structures
for coordination numbers 7 and 8
Figure 4.8 Idealized structures
for coordination numbers larger
than 8
An important distortion of the octahedral structure, found in certain
complexes, results from stretching or compressing the octahedron along
a fourfold rotation symmetry axis, producing a tetragonal distortion
(Figure 4.9a). This type of distortion is commonly found among complexes
of the d9 Cu2+ ion for reasons which will be explored in Chapter
6. Another, less important, type of distortion results from stretching or
compressing the octahedron along a threefold rotation symmetry axis,
producing a trigonal distortion (Figure 4.9b).
The higher CNs of 7, 8 and 9 are unusual for d-block metals, although
some examples can be found among the complexes of the early secondand
third-row metals. The cyano complexes of molybdenum,
[Mo(CN)8]z– (z = 3, 4), provide well-known examples and, in the solid
state, can be found with a dodecahedral or a square antiprismatic structure,
depending on the counterion present. In contrast, CNs of 8 or 9
are quite typical among the complexes formed by the f-block elements
and CNs up to 14 are known. Although regular geometries can be
assigned to these higher CNs, the energy differences between the different
structures are often small. Since the core-like nature of the f orbitals
gives little directional preference in the bonding, the structures of lanthanide
complexes tend to be determined by ligand–ligand interactions
and distortions from ideal geometries are common. The highest CNs are
found with the larger metal ions and the sterically most compact ligands
such as NO2
– or H2O. An example of 12 coordination is provided by
[Ce(NO3)6]3–, in which six octahedrally disposed nitrate groups each bind
through two oxygens to the Ce3+ ion to give a distorted icosahedral structure.
A rare example of a CN of 14 is found in the solid-state structure
of [U(BH4)4] in which the U4+ ion is bonded to 14 hydrogen atoms.
In addition to the structural isomerism possible for each CN, several
62 d- and f- Block Chemistry
Figure 4.9 Distortions of the
octahedral coordination geometry
M
M
M
M
Elongate or compress along a fourfold rotation (C4) axis
(a) Tetragonal
(b) Trigonal
Elongate or compress along a threefold rotation (C3 ) axis
other types of isomerism (geometric, optical, linkage, coordination, ligand,
ionization, solvate) are possible in transition element complexes.
Geometric Isomerism
In heteroleptic complexes the different possible geometric arrangements
of the ligands can lead to isomerism, and important examples of this
behaviour are found with CNs 4 and 6. In a square planar complex of
formula [MX2L2] (X and L are unidentate) the two ligands X may be
arranged adjacent to each other, in a cis isomer, or opposite each other,
in a trans isomer. Such isomerism is not possible for a tetrahedral geometry
but similar behaviour is possible in CN 6 octahedral complexes of
formula [MX2L4] in which the two ligands X may be oriented cis or trans
to each other (Figure 4.10a). This type of isomerism also arises when ligands
L–L (e.g. L–L = NH2CH2CH2NH2) with two donor atoms are present
in complexes of formula [MX2(L–L)2]. A further example of
geometric isomerism can occur in octahedral complexes of formula
[MX3L3], depending on whether the three ligands X, or L, all lie in the
same plane giving a meridional, or mer, isomer, or whether they are adjacent
forming a triangular face of the octahedron in a facial, or fac, isomer
(Figure 4.10b).
Coordination Compounds 63
Figure 4.10 Isomers of octahedral
complexes
L
M
L
L
L
L
L
Δ
N
H H
H
N N
M
Y
X
Z
L
M
L
L
L L
L
L
M
X
L
X
L
L
L
M
X
X
L
L
L
Δ
X
M
X
L
L L
L
L
M
L
L
X L
X
L
M
X
L
X
L
X
X
M
X
L
L X
L
chelating
ligand L–L [M(L–L)2X2]
enantiomers
[ML4X2]
cis trans
[ML3X3]
[M(L–L)3]
mer
Λ
fac
Isomers
Λ enantiomers
Isomers
Isomers Isomers
Chiral complexes
(a) (b)
(c)
(d) (e)
Optical Isomerism
In the octahedral complexes cis-[MX2(L–L)2] and [M(L–L)3] the presence
of the ligands L–L leads to a further isomeric possibility since the metal
centre is chiral (Figure 4.10c). The presence of the L–L ligands gives rise
to a propeller shape. When rotated clockwise the Δ isomer appears to
screw into the plane while the Λ isomer appears to screw out of the plane
(Figure 4.10d). Thus [Co(en)3]3+ is chiral, and can be resolved into its Δ
and Λ isomers through fractional crystallization with a chiral counter
ion such as tartarate. A tetrahedral complex with four different unidentate
ligands will also be chiral, just like a carbon atom in a chiral organic
molecule. In practice, examples of this type are rare, but an important
example of similar structural type arises with heteroleptic CN 6 complexes
containing one fac-tridentate ligand and three different unidentate
ligands (Figure 4.10e). Some compounds of this type have been
found to be effective reagents in the asymmetric synthesis of chiral organic
molecules and are of importance in the synthesis of certain fine chemicals
and pharmaceuticals.
Linkage Isomerism
Linkage isomerism arises when a ligand may bind to a metal ion through
either of two or more different donor atoms. A simple example is provided
by complexes containing the thiocyanate ligand, NCS–, which may
bind through the nitrogen to give M–NCS or the sulfur to give M–SCN.
The former may be associated with the valence tautomer –N=C=S and
the latter with N≡C–S–. Jørgensen1 discovered the first example of such
behaviour in the complex [Co(NH3)(NO2)]Cl2, which can be obtained as
a red form, in which the nitrite ligand is bound through oxygen, and as
a yellow form, in which the nitrite ligand is bound through nitrogen.
Coordination Isomerism
This form of isomerism arises from the interchange of ligands between
cationic and anionic complexes of different metal ions present in a salt.
An example is provided by [Co(NH3)6][Cr(CN)6], in which the NH3 ligands
are bound to Co3+ and the CN– ligands to Cr3+, and its coordination
isomer [Cr(NH3)6][Co(CN)6] in which the NH3 ligands are bound to
Cr3+ and the CN– ligands to Co3+. A special case of coordination isomerism
can arise in which a series of compounds have the same empirical
formula but different molecular masses for the salt. This is sometimes
referred to as ‘polymerization isomerism’, although it does not involve
polymerization according to a conventional definition involving the linking
together of a single repeating unit. An example of polymerization
64 d- and f- Block Chemistry
isomerism is provided by the series of salts in which both the cation and
the anion contain Co3+ and which have the empirical formula
{Co(NH3)3(NO2)3}x, e.g.
[Co(NH3)6][Co(NO2)6] (x = 2)
[Co(NH3)4(NO2)2][Co(NH3)2(NO2)4] (x = 2)
[Co(NH3)5(NO2)][Co(NH3)2(NO2)4]2 (x = 3)
[Co(NH3)6][Co(NH3)2(NO2)4]3 (x = 4)
Ligand Isomerism
As the name implies, ligand isomerism arises from the presence of ligands
which can adopt different isomeric forms. An example is provided
by diaminopropane, which may have the amine groups in the terminal
1,3-positions (H2NCH2CH2CH2NH2) or in the 1,2-positions {H2NCH2-
CH(Me)NH2}.
Ionization Isomerism
This arises when the counterion in a complex salt is a proligand and can,
in principle, displace a ligand which can then become the counterion. An
example is provided by the ionization isomers [Co(NH3)5SO4]Br and
[Co(NH3)5Br](SO4).
Solvate Isomerism
This form of isomerism, sometimes known as ‘hydrate isomerism’ in the
special case where water is involved, is similar in some ways to ionization
isomerism. Solvate isomers differ by whether or not a solvent
molecule is directly bonded to the metal ion or merely present as free
solvent in the crystal lattice or solution. An example is provided by the
aqua complex [Cr(H2O)6]Cl3 and its solvate isomer [Cr(H2O)5Cl]Cl2.H2O.
Coordination Compounds 65
Worked Problem 4.1
Q Draw all the possible isomers of a five-coordinate complex of
formula [M(L–L)X2A]. In each case, identify the situations in which
optical isomers are possible (A and X represent different unidentate
ligands; L–L represents a bidentate ligand).
4.3 Nomenclature
The systematic naming, or nomenclature, of coordination compounds
can be complicated to apply, but it is essential to have some familiarity
with the basic rules of nomenclature and to be able to work out the structure
of a compound from its systematic name. Only a very brief summary
of the rules for naming of coordination compounds can be given
here, but more detailed accounts are available elsewhere.2,3
4.3.1 Formulae
The formula of a complete coordination entity (e.g. [Co(NH3)6]3+) is written
in square brackets. The absence of [—] implies that not all of the ligands
in the coordination sphere, typically water or solvent, are given in
the formula. As an example, CoCl2 could refer to anhydrous CoCl2,
[CoCl2(H2O)4] or [Co(H2O)6]Cl2, although the latter might be written as
CoCl2.4H2O and CoCl2.6H2O, respectively. The symbol of the central
atom is given first followed by the anionic then the neutral ligands, each
set in alphabetical order. Where possible the donor atom is written first,
66 d- and f- Block Chemistry
A In five-coordinate complexes the basic regular geometries to consider
are square pyramidal and trigonal bipyramidal. The ligands
X and A may occupy apical or basal sites in the former and axial
or equatorial sites in the latter. Similarly, L–L may span similar
locations or different locations in either geometry. The possibilities
which arise are shown in Figure 4.11.
L
M
L X
A X
L
M
X L
X A
X
M
L X
L A
A
M
L
X
X
L
X
M
X L
A L
L
M
L X
X A
A
M
L
X
X
L
X
M
L
A
X
L
A
M
X L
X L
X
M
L
A
X
L
X
M
X
A
L
L
A
M
X
X
L
L
Enantiomers Enantiomers
Enantiomers
Square pyramidal Trigonal bipyramidal
Enantiomers
Figure 4.11
one exception being water which is conventionally written H2O rather
than OH2. Within the formula, brackets should be ‘nested’ as [{( )}] or
[{[( )]}]. Where the formulae of salts are given, cations come before
anions, e.g. [Co(H2O)6](NO3)2 and K3[Fe(CN)6]. The oxidation states of
the metal ions may be given as superscript Roman numerals following
the ion to which they refer, e.g. [CrIIICl6]3–. Abbreviations may be used
in formulae. These include standard abbreviations for functional groups,
such as Me, Et and Ph respectively for methyl, ethyl or phenyl groups,
and specific abbreviations for ligands, e.g. py for pyridine and en for
ethane-1,2-diamine. Where protic acid ligands are present it is important
to remember that the abbreviation for the neutral ligand must include
the proton(s), so that ox2– may represent ethanedioate (oxalate) and H2ox
represents ethanedioic acid (oxalic acid).
4.3.2 Names
The names of coordination compounds are constructed by listing the
ligands in alphabetical order, regardless of charge, before the name of
the central atom. Numerical prefixes are used to indicate the numbers of
each ligand present, and the oxidation state is given as Roman numerals
in parentheses at the end, e.g. dichlorobis(trimethylamine)-
platinum(II) for [PtCl2(NMe3)2]. Di, tri, etc., are normally used but with
more complicated ligand names the prefixes bis, tris, tetrakis, etc., are
used to avoid confusion, e.g. trichlorotris(trimethylphosphine)rhodium(
III) for [RhCl3(PMe3)3]. In the names of salts, cations come before
anions, as with formulae. Anionic coordination compounds are given the
suffix -ate. Either the oxidation state of the central atom {Stock system;
e.g. hexamminecobalt(III) trichloride for [Co(NH3)6]Cl3}4 or the charge
on the complex (Ewens–Bassett system)5 may be given, e.g. tripotassium
hexacyanoferrate(3–) for K3[Fe(CN)6]; in the Stock system this is
tripotassium hexacyanoferrate(III). Note that ammine in this context
refers to NH3 as a ligand, the term -amine being used for a derivative
such as dimethylamine, NHMe2. Stereochemical descriptors may precede
names or formulae to indicate which isomeric form is present, e.g. cisdiamminedichloroplatinum(
II) for cis-[PtCl2(NH3)2].
4.3.3 Special Symbols
Greek letters are used as special symbols to signify particular structural
features in a compound. The character μ is used to denote an atom or
group which bridges between two or more metal centres. A subscript
denotes the number of atoms bridged as shown in 4.1 and 4.2. The symbol
η is used to denote connected atoms in a ligand which bind to the
metal atom and a superscript identifies the number involved, as shown
Coordination Compounds 67
for 4.3 and 4.4. Finally, the symbol κ is used to denote unconnected
atoms in a polydentate ligand which bind to the metal centre and again
a superscript denotes the number of donor atoms involved and may be
followed by the appropriate donor atom symbol italicized, as in 4.5.
68 d- and f- Block Chemistry
Cl
Cl
Pd
CH2
CH2
L2M
O
ML2
ML2
Cl Cl
M Cl
Cl
Cl
M
L L
L L
[(ML2)(μ2-Cl)2] [(ML2)(μ2-Cl)3(μ3-O)] [PdCl2(η2-C2H4)]
4.1 4.2 4.3
HN
Co
Cl
Cl Cl
H2N NH2
I
Fe
CO
CO
[Fe(η5-C5H5)I(CO)2] [CoCl3{(NH2CH2CH2)2NH-κ3-N,N,N}]
4.4 4.5
Worked Problem 4.2
Q Devise systematic names for the compounds shown in 4.6 and
4.7:
A Placing the ligand names in alphabetical order before the metal
ion name gives:
4.6: dipotassium pentachloronitridoosmate(VI) (Stock system)
{or dipotassium pentachloronitridoosmate(2–) (Ewens–Bassett
system)};
3Cl–
H2N
H2
HN N
NH
2
NH
NH2
Co
N
Os
Cl
Cl Cl
Cl Cl
2K+
4.6 4.7
2–
3+
Coordination Compounds 69
4.7: bis(1,4,7-triazaheptane-κ3-N,N′,N″)cobalt(III) trichloride.
Summary of Key Points
1. The environment of a metal ion in a coordination compound is
defined by its coordination number and coordination geometry.
2. Any of a wide variety of ligands may be involved in forming
coordination compounds with metals.
3. Different isomeric structures are possible for many complexes
and seven different types of isomerism may be identified.
4. A systematic system of nomenclature exists for coordination
compounds of metal ions.
Problems
4.1. Consult text books from the Further Reading section and, for
each of the coordination geometries for coordination numbers from
2 to 8, identify at least one known compound which exemplifies
that coordination geometry. Draw the structure of each using a
notation which reveals the three-dimensional arrangement of the
groups.
4.2. List the seven types of isomerism possible for coordination
compounds, giving an example of each.
4.3. Draw all the possible isomers of:
(i) a four-coordinate complex [ML2XY]
(ii) an octahedral complex [MA2LXYZ]
In each case, identify the situations in which optical isomers are
possible (A, L, X, Y, Z represent different unidentate ligands)
4.4. Draw the possible isomers of the complex [Ru{S2C2-
(CF3)2}(CO)(PPh3)2], in which S2C2(CF3)2 is a bidentate dithiolate
ligand (Figure 4.1).
70 d- and f- Block Chemistry
4.5. Devise systematic names for the compounds shown in
Formulae 4.8–4.11:
NMe2
Co
NMe2
H3N NH3
H3N NH3
Cl
Cl PEt3
PEt3
Pt
4.8 4.9
+
OEt–
PhS
Cl
Pd
Br
Br
Me
S
Pt
Me
S Br
Br
Pt
Me
Me
4.10 4.11
References
1. S. M. Jørgensen, Z. Anorg. Chem., 1893, 5, 147; 1899, 19, 109.
2. J. E. Huheey, E. A. Keiter and R. L. Keiter, Inorganic Chemistry,
4th edn., HarperCollins, New York, 1993, appendix A3.
3. A comprehensive account may be found in the chapter by T. E.
Sloane in Comprehensive Coordination Chemistry, ed. G. Wilkinson,
R.D. Gillard and J.A. McCleverty, Pergamon Press, Oxford, 1987.
4. A. Stock, Z. Angew. Chem., 1919, 27, 373.
5. R. G. V. Ewens and H. Bassett, Chem. Ind., 1949, 27, 131.





Vedic Math Formulas

Vedic Math Formulas
The Sixteen Sutras of Vedic Math
Vedic Mathematics
Vedic Math essentially rests on the 16 Sutras or mathematical formulas as referred to in the Vedas. Sri Sathya Sai Veda Pratishtan has compiled these 16 Sutras and 13 sub-Sutras. The links below take you to the explanation, meaning and methods of application with examples for these Sutras.
Ekadhikina Purvena
(Corollary: Anurupyena)
Meaning: By one more than the previous one
Nikhilam Navatashcaramam Dashatah
(Corollary: Sisyate Sesasamjnah)
Meaning: All from 9 and the last from 10
Urdhva-Tiryagbyham
(Corollary: Adyamadyenantyamantyena)
Meaning: Vertically and crosswise
Paraavartya Yojayet
(Corollary: Kevalaih Saptakam Gunyat)
Meaning: Transpose and adjust
Shunyam Saamyasamuccaye
(Corollary: Vestanam)
Meaning: When the sum is the same that sum is zero
(Anurupye) Shunyamanyat
(Corollary: Yavadunam Tavadunam)
Meaning: If one is in ratio, the other is zero
Sankalana-vyavakalanabhyam
(Corollary: Yavadunam Tavadunikritya Varga Yojayet)
Meaning: By addition and by subtraction
Puranapuranabyham
(Corollary: Antyayordashake'pi)
Meaning: By the completion or non-completion
Chalana-Kalanabyham
(Corollary: Antyayoreva)
Meaning: Differences and Similarities
Yaavadunam
(Corollary: Samuccayagunitah)
Meaning: Whatever the extent of its deficiency
Vyashtisamanstih
(Corollary: Lopanasthapanabhyam)
Meaning: Part and Whole
Shesanyankena Charamena
(Corollary: Vilokanam)
Meaning: The remainders by the last digit
Sopaantyadvayamantyam
(Corollary: Gunitasamuccayah Samuccayagunitah)
Meaning: The ultimate and twice the penultimate
Ekanyunena Purvena
(Corollary: Dhvajanka)
Meaning: By one less than the previous one
Gunitasamuchyah
(Corollary: Dwandwa Yoga)
Meaning: The product of the sum is equal to the sum of the product
Gunakasamuchyah
(Corollary: Adyam Antyam Madhyam)
Meaning: The factors of the sum is equal to the sum of the factors
Vedic Math Basics
Terms and Operations
Addition and Subtraction
Multiplication
Division
Miscellaneous
TERMS AND OPERATIONS
a) Ekadhika means ‘one more’
e.g: Ekadhika of 0 is 1
Ekadhika of 1 is 2
-----------------
Ekadhika of 8 is 9
-------------------
Ekadhika of 23 is 24
---------------------
Ekadhika of 364 is 365------
b) Ekanyuna means ‘one less’
e.g: Ekanyuna of 1 2 3 ..... 8 ..... 14 .....69 ......
is 0 1 2 ..... 7 ......13 .... 68 ......
c) Purak means ‘ complement’
e.g: purak of 1 2 3 ..... 8., 9 from 10
is 9 8 7 ..... 2 1
d) Rekhank means ‘a digit with a bar on its top’. In other words it is a negative number.

_
e.g: A bar on 7 is 7. It is called rekhank 7 or bar 7. We treat purak as a Rekhank.
_ _
e.g: 7 is 3 and 3 is 7
At some instances we write negative numbers also with a bar on the top of the numbers as
_
-4 can be shown as 4.
__
-21 can be shown as 21.
e) Addition and subtraction using Rekhank.
Adding a bar-digit i.e. Rekhank to a digit means the digit is subtracted.
_ _ _
 
e.g: 3 + 1 = 2, 5 + 2 = 3, 4 + 4 = 0
Subtracting a bar - digit i.e. Rekhank to a digit means the digit is added.
_ _ _
 
e.g: 4 - 1 = 5, 6 - 2 = 8, 3 - 3 = 6
1. Some more examples
e.g: 3 + 4 = 7
_ _ _
(-2) + (-5) = 2 + 5 = 7 or -7
f) Multiplication and Division using rekhank.
1. Product of two positive digits or two negative digits ( Rekhanks ) 
_ _
 
e.g: 2 X 4 = 8; 4 X 3 = 12 i.e. always positive
2. Product of one positive digit and one Rekhank
_ _ _ __
 
e.g: 3 x 2 = 6 or -6; 5 X 3 = 15 or -15 i.e. always Rekhank or negative.
3. Division of one positive by another or division of one Rekhank by another Rekhank.
_ _
 
e.g: 8 ÷ 2 = 4, 6 ÷ 3 = 2 i.e. always positive
4. Division of a positive by a Rekhank or vice versa.
__ _ _ _
 
e.g: 10 ÷ 5 = 2, 6 ÷ 2 = 3 i.e. always negative or Rekhank.
g) Beejank: The Sum of the digits of a number is called Beejank. If the addition is a two digit number, Then these two digits are also to be added up to get a single digit.
e.g: Beejank of 27 is 2 + 7 = 9.
Beejank of 348 is 3 + 4 + 8 = 15
Further 1 + 5 = 6. i.e. 6 is Beejank.
Beejank of 1567 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 5 + 6 + 7 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 19 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif1 + 9 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1
i.e. Beejank of 1567 is 1.
ii) Easy way of finding Beejank:
Beejank is unaffected if 9 is added to or subtracted from the number. This nature of 9 helps in finding Beejank very quickly, by cancelling 9 or the digits adding to 9 from the number.
eg 1: Find the Beejank of 632174.
As above we have to follow
632174 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 6 + 3 + 2 + 1 + 7 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 23 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif2 + 3 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 5
But a quick look gives 6 & 3 ; 2 & 7 are to be ignored because 6+3=9,2+7=9. Hence remaining 1 + 4http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 5 is the beejank of 632174.
eg 2:
Beejank of 1256847 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1+2+5+6+8+4+7 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif33 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 3+3 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 6.
But we can cancel 1& 8, 2& 7, 5 & 4 because in each case the sum is 9. Hence remaining 6 is the Beejank.
h) Check by Beejank method:
The Vedic sutra - Gunita Samuccayah gives ‘the whole product is same’. We apply this sutra in this context as follows. It means that the operations carried out with the numbers have same effect when the same operations are carried out with their Beejanks.
Observe the following examples.
i) 42 + 39
Beejanks of 42 and 39 are respectively 4 + 2 = 6 and 3 + 9 = 12 and 1+2=3
Now 6 + 3 = 9 is the Beejank of the sum of the two numbers
Further 42 + 39 = 81. Its Beejank is 8+ 1 = 9.
we have checked the correctness.
ii) 64 + 125.

64
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 6 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 10 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 0 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1

125
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 2 + 5 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 8
Sum of these Beejanks 8 + 1 = 9
Note that

64 + 125 = 189
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 8 + 9 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 18 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 8 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9
we have checked the correctness.
iii) 134 - 49

134
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 3 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 8

49
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 4+9 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 13 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 3 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 4
Difference of Beejanks 8 -4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 4, note that 134 – 49 = 85
Beejanks of 85 is 8 + 5 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 85 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 8 + 5 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif13 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 3 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 4 verified.
iv) 376 - 284

376
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7 ( http://www.vedamu.org/Mathematics/VedicBreifing/Images/since.gif 6 + 3 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9)

284
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 2 + 8 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 14 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 5
Difference of Beejanks = 7 – 5 = 2
376 – 284 = 92
Beejank of 92 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9 + 2 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 11 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 1 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif2
Hence verified.
v) 24 X 16 = 384
Multiplication of Beejanks of
24 and 16 is 6 X 7 = 42 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 4 + 2 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 6
Beejank of 384 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 3 + 8 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 15 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 5http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 6
Hence verified.
vi) 237 X 18 = 4266
Beejank of 237 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 2 + 3 + 7 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 12 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 2http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 3
Beejank of 18 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 8 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9
Product of the Beejanks = 3 X 9 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 27 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 2 + 7 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9
Beejank of 4266 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 4 + 2 + 6 + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 18 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif1 + 8 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9
Hence verified.
vii) 242 = 576
Beejank of 24 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 2 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 6
square of it 62 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 36 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9
Beejank of result = 576 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 5 + 7 + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 18 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 8 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 9
Hence verified.
viii) 3562 = 126736
Beejank of 356 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 3 + 5 + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 5
Square of it = 52 = 25 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 2 + 5 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7
Beejank of result 126736 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 2 + 6 + 7 + 3 + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7
( http://www.vedamu.org/Mathematics/VedicBreifing/Images/since.gif 7 + 2 = 9; 6 + 3 = 9) hence verified.
ix) Beejank in Division:
Let P, D, Q and R be respectively the dividend, the divisor, the quotient and the remainder.
Further the relationship between them is P = ( Q X D ) + R
eg 1: 187 ÷ 5
we know that 187 = ( 37 X 5 ) + 2 now the Beejank check.
We know that 187 = (37 X 5) +2 now the Beejank check.
187 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 8 + 7 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7( http://www.vedamu.org/Mathematics/VedicBreifing/Images/since.gif 1 + 8 = 9)
(37 X 5) + 2 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif Beejank [(3 + 7) X 5] + 2
http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 5 + 2 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7
Hence verified.
eg 2: 7986 ÷ 143
7896 = (143 X 55) + 121
Beejank of 7986 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7 + 9 + 8 + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 21
( http://www.vedamu.org/Mathematics/VedicBreifing/Images/since.gif 9 is omitted) http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 2 + 1 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 3
Beejank of 143 X 55 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif (1 + 4 + 3) (5 + 5)
http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 8 X 10 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 80 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif (8 + 0) http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 8
Beejank of (143 X 55) + 121 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 8 + (1 + 2 + 1)
http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 8 + 4 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 12 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 2 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 3
hence verified.

Check the following results by Beejank method

1. 67 + 34 + 82 = 183 2. 4381 - 3216 = 1165

3. 632
 = 3969 4. (1234)2 = 1522756

5. (86X17) + 34 = 1496 6. 2556 ÷ 127 gives Q =20, R = 16

i) Vinculum : The numbers which by presentation contains both positive and negative digits are called vinculum numbers.

ii) Conversion of general numbers into vinculum numbers.
We obtain them by converting the digits which are 5 and above 5 or less than 5 without changing the value of that number.
Consider a number say 8. (Note it is greater than 5). Use it complement (purak - rekhank) from 10. It is 2 in this case and add 1 to the left (i.e. tens place) of 8.
_
Thus 8 = 08 = 12.

The number 1 contains both positive and negative digits
_ _
i.e. 1 and 2 . Here 2 is in unit place hence it is -2 and value of 1 at tens place is 10.
_
Thus 12
 = 10 - 2 = 8

Conveniently we can think and write in the following way
General Number
Conversion
Vinculum number
_
6
10 - 4
14
_
97
100 - 3
103
__
289
300 - 11
311
etc.,,
The sutras ‘Nikhilam Navatascharamam Dasatah’ and ‘Ekadhikena purvena’ are useful for conversion.
eg 1: 289, Edadhika of 2 is 3
_
 
Nikhilam from 9 : 8 - 9 = -1 or 1
_
 
Charmam from 10 :9 -10 = -1 or 1
__
 
i.e. 289 in vinculum form 311
eg 2: 47768 

‘Ekadhika’ of 4 is 5
___
 
‘Nikhilam’ from 9 (of 776) 223
_
 
‘Charmam from 10 (of 8) 2
____
 
Vinculum of 47168 is 5 2232
eg 3: 11276.
Here digits 11 are smaller. We need not convert. Now apply for 276 the two sutras Ekadhika of 2 is 3
__
 
‘Nikhilam Navata’ for 76 is 24
__
 
11276 = 11324
__ 

i.e. 11324 = 11300 - 24 = 11276.
The conversion can also be done by the sutra sankalana vyavakalanabhyam as follows.
eg 4: 315.
sankalanam (addition) = 315+315 = 630.
_
 
Vyvakalanam (subtraction) = 630 - 315 = 325

Working steps : _
0 - 5 = 5

3 - 1 = 2

6 - 3 = 3
Let’s apply this sutra in the already taken example 47768.
Samkalanam = 47768 + 47768 = 95536
Vyavakalanam = 95536 - 47768.
http://www.vedamu.org/Mathematics/VedicBreifing/Images/p24.gif
Consider the convertion by sankalanavyavakalanabhyam and check it by Ekadhika and Nikhilam.
eg 5: 12637
1. Sankalana ....... gives, 12637 + 12637 = 25274
_ _
25274 – 12637 = (2 – 1) / (5 – 2) / (2 – 6) / (7 – 3) / (4 – 7) = 13443
2. Ekadhika and Nikhilam gives the following.
As in the number 1 2 6 3 7, the smaller and bigger digits (i.e. less than 5 and; 5, greater than 5) are mixed up, we split up in to groups and conversion is made up as given below.
Split 1 2 6 and 3 7
_ _
Now the sutra gives 1 2 6 as 134 and 37 as 43
_ _
 
Thus 12637 = 13443
_
Now for the number 315 we have already obtained vinculum as 325 by "sankalana ... " Now by ‘Ekadhika and Nikhilam ...’ we also get the same answer.
315 Since digits of 31 are less than 5,
We apply the sutras on 15 only as
Ekadhika of 1 is 2 and Charman of 5 is 5 .
Consider another number which comes under the split process.
eg 6: 24173
As both bigger and smaller numbers are mixed up we split the number 24173 as 24 and 173 and write their vinculums by Ekadhika and Nikhilam sutras as 
_ __
 
24 = 36 and 173 = 227
_ __
 
Thus 24173 = 36227

Convert the following numbers into viniculum number by
i. Ekadhika and Nikhilam sutras ii. Sankalana vyavakalana sutra. Observe whether in any case they give the same answer or not.

1. 64 2. 289 3. 791

4. 2879 5. 19182 6. 823672

7. 123456799 8. 65384738

ii) Conversion of vinculum number into general numbers.
The process of conversion is exactly reverse to the already done. Rekhanks are converted by Nikhilam where as other digits by ‘Ekanyunena’ sutra. thus:
_
 
i) 12 = (1 – 1) / (10 – 2) Ekanyunena 1 – 1
_
= 08 = 8 Nikhilam. 2 = 10 – 2
__
ii) 326 = (3 – 1) / (9 – 2) / (10 – 6)

= 274
_ _
iii) 3344 = (3 – 1) / (10 – 3) / (4 – 1) / (10 – 4)

= 2736 (note the split)
__ __
iv) 20340121 = 2/(0–1)/(9–3)/(10–4)/(0–1)/(9–1)/(10–2)/1
_ _
= 21661881
_ _
= 21 / 6 / 61 / 881. once again split

= (2 – 1) / (10 –1) / 6 / (6 –1) / (10 –1) / 881

= 19659881
___
v) 303212 = 3 / 0321 / 2

= 3 / (0-1) / (9-3) / (9-2) / (10-1) / 2
_
3 / 1 / 6792

(3 –1) / (10 –1) / 6792

= 296792.

iii) Single to many conversions.
It is interesting to observe that the conversions can be shown in many ways.
eg 1: 86 can be expressed in following many ways
__
86 = 90 - 4 =94
__
= 100 – 14 = 114
___
 
= 1000 – 914 = 1914
_ __ ___ ____
Thus 86 = 94 = 114 = 1914 = 19914 = ………….
eg 2 :
_ _
07 = -10 +3 = 13
__ _
36 = -100 + 64 = 164
___ _
978 = -1000 + 22 = 1022. etc.,

* Convert by Vedic process the following numbers into vinculum numbers.

1) 274 2) 4898 3) 60725 4) 876129.
* Convert the following vinculum numbers into general form of numbers ( normalized form)

1) 283 2) 3619 3) 27216

4) 364718 5) 60391874

(iv) Vedic check for conversion:
The vedic sutra "Gunita Samuctayah" can be applied for verification of the conversion by Beejank method.
Consider a number and find its Beejank. Find the vinculum number by the conversion and find its Beejank. If both are same the conversion is correct.
eg.
_
196 = 216 . Now Beejank of 196 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7
Beejank of 216 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 2 + ( -1 ) + 6 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 7. Thus verified.
But there are instances at which, if beejank of vinculum number is rekhank i.e. negative. Then it is to be converted to +ve number by adding 9 to Rekhank ( already we have practised) and hence 9 is taken as zero, or vice versa in finding Beejank.
eg:
__
213 = 200 - 13 = 187
_
 
Now Beejank of 213 = 2 + ( -1 ) + (-3 ) = -2

Beejank of 187 = 1 + 8 + 7 = 16
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif 1 + 6 = 7
The variation in answers can be easily understood as
_ _
2 = 2 + 9
 http://www.vedamu.org/Mathematics/VedicBreifing/Images/arrown.gif - 2 + 9 = 7 Hence verified.

Use Vedic check method of the verification of the following result.
_ _ _
1. 24 = 36 2. 2736 = 3344.
__ _ _
3. 326 = 274 4. 23213 = 17187

Addition and subtraction using vinculum numbers.
eg 1: Add 7 and 6 i.e., 7+6.
i) Change the numbers as vinculum numbers as per rules already discussed.
_ _
 
{ 7 = 13 and 6 = 14 }
ii) Carry out the addition column by column in the normal process, moving from top to bottom or vice versa.
http://www.vedamu.org/Mathematics/VedicBreifing/Images/p25.gif
iii) add the digits of the next higher level i.e.,, 1 + 1 = 2
_
13
_
14
____
_
27
iv) the obtained answer is to be normalized as per rules already explained. rules already explained.
_
 
i.e., 27 = (2 - 1) (10- 7) = 13 Thus we get 7 + 6 = 13.
eg 2 : Add 973 and 866.
_ _
973 = 1 0 3 3 1 0 3 3
_ _ _ _ _ _
866 = 1 1 3 4 1 1 3 4
______
_ _ _
2 1 6 1
___
But 2161 = 2000 - 161 = 1839.
Thus 973+866 by vinculum method gives 1839 which is correct.
Observe that in this representation the need to carry over from the previous digit to the next higher level is almost not required.
eg 3 : Subtract 1828 from 4247.

i.e.,, 4247
-1828
______
____
Step (i) : write –1828 in Bar form i.e.,, 1828
____
(ii) : Now we can add 4247 and 1828 i.e.,,

4247
____
+1828
_______
_ _
3621
_ _ _ _ _ _
since 7 + 8 = 1, 4 + 2 = 2, 2 + 8 = 6, 4 + 1 = 3
_ _
(iii) Changing the answer 3621 into normal form using Nikhilam, we get
_ _ _ _
3621 = 36 / 21 split

= (3 –1) / (10 – 6) / (2 – 1) / (10 – 1) = 2419
http://www.vedamu.org/Mathematics/VedicBreifing/Images/symbolnn.gif 4247 – 1828 = 2419

Find the following results using Vedic methods and check them

1) 284 + 257 2) 5224 + 6127

3) 582 - 464 4) 3804 - 2612
ADDITION AND SUBTRACTION
ADDITION:
In the convention process we perform the process as follows.
234 + 403 + 564 + 721
write as 234
403
564
721
Step (i): 4 + 3 + 4 + 1 = 12 2 retained and 1 is carried over to left.
Step (ii): 3 + 0 + 6 + 2 = 11 the carried ‘1’ is added
i.e., Now 2 retained as digit in the second place (from right to left) of the answer and 1 is carried over to left.
step (iii): 2 + 4 + 5 + 7 = 18 carried over ‘1’ is added
i.e., 18 + 1 = 19. As the addition process ends, the same 19 is retained in the left had most part of the answer.
thus 234
403
564
+721
_____
 
1922 is the answer
we follow sudhikaran process Recall ‘sudha’ i.e., dot (.) is taken as an upa-sutra (No: 15)
consider the same example
http://www.vedamu.org/Mathematics/VedicBreifing/Images/p26.gif
i) Carry out the addition column by column in the usual fashion, moving from bottom to top.
(a) 1 + 4 = 5, 5 + 3 = 8, 8 + 4 = 12 The final result is more than 9. The tenth place ‘1’ is dropped once number in the unit place i.e., 2 retained. We say at this stage sudha and a dot is above the top 4. Thus column (1) of addition (right to left) 
. 
4
3
4
 
1
__
2
 

b) Before coming to column (2) addition, the number of dots are to be counted, This shall be added to the bottom number of column (2) and we proceed as above.
Thus second column becomes.
3 dot=1, 1 + 2 = 3
0 3 + 6 = 9
6 9 + 0 = 9
2 9 + 3 = 12
__
2
2 retained and ‘.’ is placed on top number 3

c) proceed as above for column (3)

2 i) dot = 1 ii) 1 + 7 = 8
4 iii) 8 + 5 = 13 iv) Sudha is said.
.
5 A dot is placed on 5 and proceed
7 with retained unit place 3.
__
9 v) 3+4=7,7+2=9 Retain 9 in 3rd
 digit i.e.,in 100thplace.

d) Now the number of dots is counted. Here it is 1 only and the number is carried out left side ie. 1000th
 place..
Thus 234
403
.
564
+721
_____
1922 is the answer.
Though it appears to follow the conventional procedure, a careful observation and practice gives its special use.

eg (1):
. 
437. .
624
.
586
+162
______
1809

Steps 1:
i) 2 + 6 = 8, 8 + 4 = 12 so a dot on 4 and 2 + 7 = 9 the answer retained under column (i)
ii) One dot from column (i) treated as 1, is carried over to column (ii),
thus 1 + 6 = 7, 7 + 8 = 15 A' dot’; is placed on 8 for the 1 in 15 and the 5 in 15 is added to 2 above.
5 + 2 = 7, 7 + 3 = 10 i.e. 0 is written under column (ii) and a dot for the carried over 1 of 10 is placed on the top of 3.
(iii) The number of dots counted in column (iii) are 2.
Hence the number 2 is carried over to column (ii) Now in column (iii)
2 + 1 = 3, 3 + 5 = 8, 8 + 6 = 14 A dot for 1 on the number 6 and 4 is retained to be added 4 above to give 8. Thus 8 is placed under column (iii).
iv) Finally the number of dots in column (iii) are counted. It is ‘1’ only. So it carried over to 1000th place. As there is no fourth column 1 is the answer for 4th column. Thus the answer is 1809.
Example 3:
http://www.vedamu.org/Mathematics/VedicBreifing/Images/p27.gif
Check the result verify these steps with the procedure mentioned above.
The process of addition can also be done in the down-ward direction i.e., addition of numbers column wise from top to bottom